Lampu (Lighting) Explosionproof

Lampu V Series Incandescent Fixtures
Use for task and general lighting in standard and wet locations
V Series Lampu pijar
Digunakan untuk tugas dan penerangan umum di lokasi standar dan basah

• Copper-free aluminum with epoxy/polyester finish
• Compact, durable, modular design fixture
• Models for NEMA 4 and certain hazardous locations

• Molded from 30% glass-filled thermoplastic polyester
• For wet, NEMA 4X and marine applications

• Compact in size with “wireless design” for fast installation
• Factory sealed – no external seal needed
• Full range of accessories including exit signs and inner colored globes

Lampu DV Series Incandescent Fixtures
Use for lighting in dust-ignition proof (Class II Div.1) locations,Digunakan untuk penerangan di lokasi ignition-proof (Kelas II Div.1) lokasi

• Copper-free aluminum with epoxy/polyester finish
• Compact, durable, instant-on

Lampu H Series Incandescent/ LED Fixtures
Use where infrequent lighting of Class I, Div. 1 areas is required,Digunakan pencahayaan di mana jarang Kelas I, Div. 1 daerah diperlukan

• Copper-free aluminum with epoxy/polyester finish
• For mogul base 300 or 500 watt lamps

Lampu E Series LED/Incandescent Fixtures
Use for general or task lighting where Group A or Group B gases are present, Digunakan untuk penerangan umum atau tugas di mana gas Grup A atau Grup B yang hadir

• Copper-free aluminum with epoxy/polyester finish
• For medium base 200 or 300 watt lamps

XHL Series Handlamps
Use as supplementary illumination source in Class I, Div. 1 hazardous locations,
XHL Lampu Tangan Series, digunakan sebagai sumber penerangan tambahan di Kelas I, Div. 1 lokasi berbahaya

• Phenolic handle for long service in rugged conditions
• Aluminum guard with heat & impact resistant globe
• Supplied with 100 watt rough service lamp
• Grommets included for use with user furnished SO cable

NVQ Series Non-Metallic Compact Fluorescent Fixtures
Use for task and general lighting in corrosive environments,
Lampu NVQ Series Lampu Non-Logam Compact Fluorescent Jadwal,digunakan untuk tugas dan penerangan umum dalam lingkungan korosif

• Molded from 30% glass-filled thermoplastic polyester
• For wet, NEMA 4X and certain hazardous locations
• Furnished with 18W compact fluorescent lamp

MBF Series Compact Fluorescent Fixtures
Use for lighting wet, harsh (NEMA 4X & Marine), and certain hazardous locations,
Lampu MBF Seri Fluorescent Jadwal Compact
Digunakan untuk daerah basah, keras (NEMA 4X & Marine), dan lokasi berbahaya tertentu

• Copper-free aluminum with epoxy/polyester finish
• External hardware is 316 grade stainless steel
• Compact and rugged design
• Furnished with lamps (up to 39W)

VBF/VQF Series Compact Fluorescent Fixtures
Use for lighting wet, harsh (NEMA 4X & Marine) and certain hazardous locations,
Lampu VBF / VQF Seri Fluorescent Jadwal Compact
Digunakan untuk penerangan daerah basah, keras (NEMA 4X & Marine) dan lokasi berbahaya tertentu

• Copper-free aluminum with epoxy/polyester finish
• External hardware is 316 grade stainless steel
• Full sized with range of accessories and options, with lamps included
• World voltage on VQF (120-277VAC; 50/60 Hz)

EBF/EQF Series Compact Fluorescent Fixtures
Use where explosion-proof and NEMA 4X & Marine fixtures are required,
Lampu EBF / EQF Seri Fluorescent Jadwal Compact
Digunakan di mana explosionproof/hazardous area dan NEMA 4X & Marine perlengkapan yang diperlukan

• Compact in size with “wireless design” for fast installation
• Factory sealed – no external seal needed
• Full range of accessories including exit signs and inner colored globes
• Compact fluorescent lamp included

XHLF Series Compact Fluorescent Handlamps
Use as supplementary illumination source in Class I, Div. 1 hazardous locations

• No exposed metal parts
• Supplied with 26 watt lamp and light shield
• Grommet included for use with user furnished SO cable

MB Series HID Fixtures
Use for lighting wet, harsh (NEMA 4X & Marine) and certain hazardous locations

• Copper-free aluminum with epoxy/polyester finish
• External hardware is 316 grade stainless steel
• Compact design, for use with medium base HID lamps
• Restricted Breathing model (lower temperature codes) available

TYPE LAMPU EXPROOF YANG PALING UMUM DIPAKAI  VM Series HID Fixtures
Use for area illumination of wet, harsh (NEMA 4X & Marine) and certain hazardous locations

• Copper-free aluminum with epoxy/polyester finish
• External hardware is 316 grade stainless steel
• Full sized for mogul base lamps, with range of accessories and options
• Restricted Breathing model (lower temperature codes) available

EM Series HID Fixtures
Use where explosion-proof and NEMA 4X & Marine fixtures are required (Lighting untuk Marina Pelabuhan)

• Compact in size with “wireless design” for fast installation
• Factory sealed – no external seal needed
• Full range of accessories including exit sign and inner colored globes
• For use with medium base 35-150W HID lamps

EZ Series HID Fixtures
Use where explosion-proof and NEMA 4X & Marine fixtures are required (Lighting untuk Daerah Explosive)

• Full sized with “wireless design” for fast, easy installation
• Factory sealed – no external seal needed
• Five mounting styles and options including HPS instant restart and ballast protection circuit plus Quartz emergency lighting
• For use with mogul base 50-400W HID lamps

DBF Series Linear Fluorescent Fixtures
Use in wet, NEMA 4 and certain hazardous locations where low mounting height and even light distribution from a linear type light source are required (Lampu Ruang Lembab dan Basah)

• Sheet steel 20 gauge housing with continuous weld
• Electrostatically applied polyester finish
• Silicon rubber gasketing and heat tempered glass lens

SSHZ Series Linear Fluorescent Fixtures
Use in wet, NEMA 4 and certain hazardous locations where low mounting height and even light distribution are required (Lampu NEMA4x)

• Seamless housing of 20 gauge 304 grade stainless steel
• External hardware of stainless steel
• Continuous silicone gasketing and heat tempered glass lens
• Acrylic lens option

HFX Series Linear Fluorescent Fixtures
Use in classified Class I, Div. 1 areas such as inside paint spray booths (Ruang Penyemprotan Cat)

• Copper-free aluminum construction with external stainless steel hardware
• Factory sealed – no external seals required
• UL Listed & labeled for use inside paint spray booths and rooms
• Spring loaded sockets with relamping from either end
• Slide out ballast tray for easy maintenance

LZ2N Series Non-Metallic Linear Fluorescent Fixtures
Use for lighting in corrosive environments and in certain hazardous locations (Lampu Area Daerah Korosif)

• Housing is one piece fiberglass reinforced polyester
• Lens of clear impact resistant polycarbonate
• World voltage (most models) 120-277V, 50/60Hz
• 2’ and 4’ models available

LLN2/LLN1 Series Non-Metallic Linear Fluorescent Fixtures
Use for lighting in corrosive environments and in certain hazardous locations (Lampu untuk Pabrik Petrokimia/Petrochemical)

• FRP housing with single piece polycarbonate lens
• Single point latching mechanism
• LLN2 for North American Zone 2 applications, LLN1 for Zones 1& 2
• Mounting accessories (such as suspension & ceiling mounts) available

LLC Series Non-metallic Compact Linear Fluorescent Fixtures
Use for task lighting or exit fixture in corrosive and certain hazardous areas (Lampu Exit Explosionproof)

• FRP housing with single piece low glare polycarbonate lens
• Exit sign decals apply to clear lens
• LLC Series for North American Zone 2 applications

QL Series Quartz Floodlights
Use in standard locations to provide maximum light output with low initial cost (Lampu Sorot Anti- Ledak)

• Cast aluminum housing with heat dissipating fin system
• Tempered glass lens assembly with high temperature gasketing
• Accommodates up to 1500W quartz lamps

KF Series HID Floodlights
Use for Wet/Marine/Shipboard applications plus in Class I, Div. 2 locations (Lampu Tembak Explosionproof)

• Housing of copper-free aluminum with corrosion resistant bronze finish
• All external hardware is stainless steel with continuous silicone gasketing
• Accommodates 150-1000W long life HID lamps

KFSS Series HID Marine Floodlights
Use for Wet/Marine/Shipboard applications plus in Class I, Div. 2 locations (Lampu Floodlight/Sorot berbahan Stainless Steel untuk Kapal)

• Type 316 stainless steel housing for maximum corrosion resistance
• Quick release SS lens latches, SS lens door chains, SS mounting yoke
• Accommodates 150-400W long life HID lamps

EZ Series HID Trunnion Mount Floodlights
Explosion-proof & NEMA 4X rated fixture provides directional lighting in both vertical & horizontal planes when used with floodlight mounting hardware

• Copper-free aluminum housing with powder epoxy finish
• Factory sealed – no external seal needed
• Accommodates 50-400W long life HID lamps

EM/DM HID Portable Floodlights
Provides emergency or maintenance lighting in wet and Class 1, Div. 1 areas (Lampu Portable daerah Explosion)

• Copper-free aluminum housing with safety yellow finish
• Strong base provides stability and temporary wall mounting
• Factory sealed 100 foot 16/3 SOW cord and HID lamp included

KWP Series HID Wallpack Luminaries
Use where pleasing aesthetic appearance and suitability for NEMA 4X and Class I, Div. 2 locations, in a compact energy saving fixture, are requirements

• Copper-free aluminum construction with bronze finish
• Lens thermal shock and impact resistant prismatic borosilicate glass
• Accommodates 70-175W long life HID lamps

GSH Series Compact Strobe Signal Lights
Use as visual warning or status device in wet and certain hazardous locations (Lampu Signal Emergency)

• Aluminum housing with polycarbonate lens
• High intensity Xenon flash lamp provides 400 candela with 60 flashes/min
• Four different globe colors. Can mount with globe in up or down position

ESX Series Strobe Signal Lights
Use as visual warning device for Explosion-proof, NEMA 4X and Marine duty (Lampu Strobo Explosionproof)

• Copper-free aluminum housing with epoxy/polyester finish
• High intensity strobe provides up to 200 candela with 85 flashes/min
• Five different globe colors with four mounting styles

DEB/VEB/VEQ Series Compact Fluorescent Emergency Lighting Fixtures
Use to provide OSHA required 90 minutes of illumination for egress in certain hazardous locations and for NEMA 4X applications (Lampu LED Explosionproof Emergency) Tahan Ledak

• Continuous lighting under normal power with battery backup during power outages, or ‘emergency only’ units that operate when power fails
• LED charging indicator light plus exit accessory
• Copper-free aluminum housing with epoxy/polyester finish
• World voltage (120-277V, 50-60 Hz) available on VEQ Series

EEQ Series Compact Fluorescent Emergency Lighting Fixtures
Use to provide OSHA required 90 minutes of illumination for egress in areas requiring Explosion-proof and NEMA 3 rated fixtures

• Continuous lighting under normal power with battery backup during power outages, or ‘emergency only’ units that operate when power fails
• LED charging indicator light plus exit accessory
• Copper-free aluminum housing with epoxy/polyester finish

DBFE Series Linear Fluorescent Emergency Lighting Fixtures
Use to provide OSHA required 90 minutes of illumination for egress in certain hazardous and NEMA 4 rated locations that require even light distribution

• Lighting under normal power with battery backup when power fails
• Sheet steel 20 gauge housing with continuous weld
• Electrostatically applied polyester finish with heat tempered glass

EBB Series Halogen Lamp Emergency Lighting Fixtures
Use to provide OSHA required 90 minutes of illumination for egress in areas requiring Explosion-proof fixtures

• Lighting under normal power with battery backup when power fails
• Three high intensity lamps can be independently adjusted
• Remote test station (included) for fixture testing at ground level
• Copper-free aluminum housing with epoxy/polyester finish

FKA/FH Series Fixture Hangers
Use to hang fixtures (up to 125 pounds) in standard locations

• Ball joint permits fixture to hang plumb. Allows swing up to 20 degrees
• Copper-free aluminum with set screw to lock fixture stem in place
• FH Series serves as combination splice box and flexible hanger

Hook/Loop and FH Series Fixture Hangers
Use to hang fixtures (up to 125 pounds) in standard locations

• Hook/Loop hanger consists of a hook and safety bar, which allows conversion to a loop configuration as necessary
• FH Hook is an economical hanger for pendant fixtures

V Series Hanger Boxes and Covers
Use to hang fixtures (up to 125 pounds) in standard and wet locations

• Combines splice box (in four configurations) and hanger in one unit
• Flexible hanger cover is cushioned to absorb shock and vibration
• Copper-free aluminum with set screw to lock fixture stem in place

HXB/XFH Series Fixture Hangers
Use to hang fixtures (up to 125 pounds) in Class I, Div. 1 hazardous areas

• Combines splice box and hanger in one unit
• HXB Series with four hubs in ‘X’ configuration. XFH for through feed
• Copper-free aluminum with set screws to lock fixture stem in place

EKJ Series Flexible Pendant Fixture Hangers
Suspends fixtures (up to 125 pounds) in Class I, Div. 1 hazardous & wet areas

• Permits fixtures to swing freely and to hang plumb
• Constructed of seamless bronze hose with brass outer braid and jute liner
• Provides electrical ground continuity without bonding jumper

JL/JAL Series Fixture Hangers
Use to hang fixtures (up to 125 pounds) in Class I, Div. 1 hazardous areas

• Combines splice box and hub cover for mounting pendant fixtures
• Conduit openings in straight through or four hub configurations
• Copper-free aluminum with set screws and integral mounting lugs

ENY Pendant Seal Fittings
Use to meet code requirements of a safety set screw when hanging fixtures

• Copper-free aluminum with set screws on each end
• For Class I, Div. 1 applications. Supports up to 125 pounds

VM Series Fixture Adapters
Use to upgrade existing Crouse-Hinds&Reg; fixture cap to new Killark HID, compact fluorescent, or emergency units

• Patented design. For NEMA 4X and certain hazardous locations

EAC/EZBA Series Fixture Adapters
Use to upgrade existing Crouse-Hinds&Reg; Explosion-proof units to Killark

• Converted fixtures easily removed for service using EZ mounting system

ECJ Series Cenelec Rated Fixtures
Use where ‘restricted breathing’ type, Zone 2 area fixture is required

• Compact size and low weight
• Painted copper-free aluminum with stainless steel external hardware

EM/EB/EQ Series Cenelec Rated Fixtures
Use where European “Certificate of Conformity” is required for Zone 1 areas

• Compact size fixture, with special ground lug and labeling
• Utilizes bi-pin & quad-pin compact fluorescent lamps, as well as medium base incandescent and HID (35-150W) lamps.

EZ Series Cenelec Rated Fixtures
Use where European “Certificate of Conformity” is required for Zone 1 areas

• Full size fixture, with special ground lug and labeling
• Utilizes HID (50-400W) lamps

MIC/MAX Series Cenelec Rated HID Floodlights
Use where ‘restricted breathing’ type, Zone 2 area floodlighting is required

• Highly efficient asymmetric reflector design
• Copper-free aluminum body, glass lens, stainless steel fasteners

800N Series Cenelec Rated HID Stainless Steel Floodlights
Use where ‘restricted breathing’ type, Zone 2 area floodlighting is required

• Highly efficient asymmetric reflector design
• Marine grade stainless steel body with toughened safety glass

EVO Series Cenelec Rated HID/Tungsten Halogen Floodlights
Use where floodlighting is required in Zone 1 areas

• Offers optimum lighting levels with minimum maintenance costs
• Copper-free aluminum body, toughened glass window, SS fasteners

LLI2/LLIE2 Series Cenelec Rated Non-Metallic Linear Fluorescent Fixtures
Use where Cenelec Zone 2 fixtures are required for corrosive conditions

• FRP housing with single piece polycarbonate lens
• Available as emergency fixture with battery backup and self-testing/self-diagnostic electronics with LED status display

LLI1/LLIE1 Series Cenelec Rated Non-Metallic Linear Fluorescent Fixtures
Use where Cenelec Zone 1 fixtures are required for corrosive conditions

• FRP housing with single piece polycarbonate lens
• Available as emergency fixture with battery backup and self-testing/self-diagnostic electronics with LED status display