Junction Box & Enclosures

EXB Series Bolted Enclosures
Use where explosion-proof and NEMA 4X rated enclosures are required to house electrical equipment, or as junction, pull, and/or splice boxes

• Copper-free aluminum with fewer cover bolts for easier maintenance
• 40 available sizes (6x6x4 thru 24x36x10 inches), inside dimensions
• ATEX Global Applications, with optional “CEN” suffix
• NEMA 4X (hose down & S.S. external hardware) with “SU1” suffix

B7E Series Bolted Enclosures
Use where explosion-proof and NEMA 4X rated enclosures are required to house electrical equipment, or as junction, pull, and/or splice boxes

• Copper-free aluminum construction
• 13 sizes (6.5 x 13.5 x 6.5 thru 13x50x6.5 inches), inside dimensions
• NEMA 4X rating is standard
• 2 sizes compact B7 models

XB Series Bolted Enclosures
Use in explosion-proof applications as junction or pull boxes, or to enclose meters, relays, starters, terminals or other equipment

• Copper-free aluminum construction
• 9 sizes (4x4x4 thru 12x16x8 inches), inside dimensions

XJB Series Bolted Enclosures
Use in explosion-proof applications as junction or pull boxes, or to enclose meters, relays, starters, terminals or other equipment

• Copper-free aluminum construction
• Extended cover design allows for easier installation and maintenance of enclosed equipment
• 21 available sizes (5x10x4 thru 24x24x16 inches), inside dimensions

DB Series Bolted Enclosures
Use where combustible dust creates a hazardous (Class II) location, or in wet, hose down, corrosive NEMA 4X environments

• Copper-free aluminum construction
• 20 available sizes (6x6x4 thru 24x36x10 inches), outside dimensions

TE Series Terminal Enclosures
Use in hazardous Class I, Div. 2 locations or in corrosive NEMA 4X applications, to link electrical wires. Primary circuit brought into terminal enclosure is distributed to field control devices or sensors

• TE Series for Power & Control circuits
• Enclosures in stainless steel or fiberglass reinforced polyester
• Up to 180 DIN rail mounted terminals, factory installed
• Terminal enclosures available for use with Intrinsically Safe circuits available

GE Series Threaded Terminal Enclosures
Use where a compact explosion-proof outlet body is required to link wires in a conduit system

• Copper-free aluminum with powder epoxy/polyester finish
• Weidmuller 6 point MK3 terminal block mounted inside box on raised pads
• Three different hub arrangements, plus ‘X’ type with mounting flange

GR Series Threaded Enclosures
Use where explosion-proof and NEMA 4X rated enclosures are required to house electrical equipment, or as junction, pull and/or splice boxes

• Copper-free aluminum with powder epoxy/polyester finish
• Compact square or rectangular enclosures with threaded screw type covers provide easy access to interior
• Blank, glass lens, and dome cover styles available
• Can be shipped in component parts and maintain UL/CSA/FM approvals
• ATEX Global Applications, with “CEN” suffix

GRM Series Instrument Enclosures
Use to mount 3, 3.5, or 4.5 inch round or rectangular instruments in an explosion-proof and NEMA 4X rated enclosure

• Copper-free aluminum with powder epoxy/polyester finish
• Compact square or rectangular enclosures with threaded lens covers
• Internal mounting pan is attached to inside face of box with spacers for installation of meter

HK Series Instrument Enclosures
Use to house instrumentation and devices in hazardous Class I, Div. 1 locations, as well as in areas requiring NEMA 4 (hose down) rating

• Copper-free aluminum with powder epoxy/polyester finish
• Extremely compact housing with 5 different cover styles
• Neoprene O-rings assure water resistance
• Stainless steel models available
• ATEX Global Application with “C” suffix

2HK Series Instrument Enclosures
Use to house instrumentation and devices in hazardous Class I, Div. 1 locations, as well as in areas requiring NEMA 4 (hose down) rating

• Copper-free aluminum with powder epoxy/polyester finish
• Double cover design provides two separate chambers for isolation between power and instrument
• Two Neoprene O-ring sealing gaskets provided
• ATEX Global Application with “C” suffix

Enclosure Mounting Pans
Use for mounting of relays, electrical devices, etc., into bolted or threaded enclosures

• 1/8 inch thick sheet aluminum
• Sized to provide maximum useable surface area when installed

Enclosure Hinges
Install on flanged enclosures to allow for easier and safer installation and when performing maintenance on internal components

• Stainless steel or extruded aluminum types
• All hinges supplied with stainless steel mounting screws and pins

Enclosure Drains and Breathers
Top installed fittings act as breathers while bottom installations permit water to drain from enclosure continuously

• KB1B style breather or KBID style drain
• KDB-1 serves as both drain and breather

GL/GLX Series Round Glass Lens Covers
Use with explosion or dust-ignition proof enclosures to provide viewing of internal components, such as meters

• Tempered soda lime glass lens
• For EXB, XB, XJB, DB Series bolted enclosures
• Viewing area up to 7 ¾”
• Must be factory installed

GLXR Series Rectangular Glass Lens Windows
Use in explosion-proof enclosures to enable viewing of digital read out meters and devices such as gas analyzers, process receivers, transmitters or controllers

• Tempered soda lime glass lens
• For EXB Series only
• Viewing area up to 9×9 inches
• Must be factory installed

CBH Series Circuit Breaker Handles
Use to activate circuit breakers, motor circuit protectors and non-fusible disconnects

• Complete handle mechanism includes external handle and lockout, internal switching mechanism, and adjustable shaft

EXH Series Circuit Breaker Handles
Use to activate circuit breakers and motor circuit protectors from front cover of enclosure

• Consists of external handle mechanism with through-the-enclosure shaft and internal toggle mechanism and breaker pan

TWBE Series Terminal Blocks
Use in connecting and in arrangement of control wiring for control panel and switch board applications

• Terminal blocks have clamping screw-type terminals
• TMS marking strips are included

G Series Control Operators
Use to create custom control panels and stations

• Select from a wide variety of push buttons, pilot lights, selector switches, and specialty potentiometer/ rheostat / reset / rotary / motor shaft operators
• For hazardous locations when installed in suitable enclosures such as EXB, B7E, XB, XJB, and DB Series.